Product Information - Clean Agent Systems
Clean agent systems use a variety of non-toxic, people safe and environmentally friendly agents such as Inergen®, FM-200 and NOVEC 1230. These agents are commonly used in areas with high value assets, such as electrical data processing equipment, telecommunications equipment, paper archives, precious objects and manuscripts where other types of fire suppressants may cause corrosion or other damage to the protected items.
Interstate Fire Protection represents the major manufacturers of Clean Agent Systems. This allows us to specify a Clean Agent System for your particular needs. Among the Clean Agents we offer are:
- Carbon Dioxide, INERGEN® and Sapphire® Clean Agents by ANSUL, Inc.
- Carbon Dioxide, ECARO-25®, FM-200® and PROINERT® by FIKE Corporation,
- Carbon Dioxide, FM-200®, and Novec 1230® by KIDDE Fire Systems, Inc.
Carbon Dioxide Systems are typically deployed in areas that are normally unoccupied. There are two major groups of Clean Agent Systems used in occupied spaces: inerting agents and halocarbon agents. These two types of agent are equally effective at extinguishing fire quickly and safely.
Carbon Dioxide Systems
Carbon Dioxide (CO2) is the original Clean Agent. Used in normally unoccupied areas, CO2 will not harm the equipment it is protecting. CO2 Systems are also inexpensive to recharge because CO2 is a common industrial gas. A CO2 Fire Suppression system consists of one or more banks of cylinder storage containers to supply the CO2 extinguishing agent. Flexible discharge bends, or hoses, connects the cylinders into a piping manifold. The manifold in turn distributes the agent into the piping network. Nozzles regulate the flow of CO2 into the protected area. CO2 extinguishes fire by lowering the oxygen to a level that will not support combustion.
Since CO2 is lethal in fire extinguishing design concentrations, they are not intended for use in normally occupied spaces. When they are used to protect areas that have the potential to be occupied, extensive safety measures are taken to allow the occupant to exit prior to a CO2 discharge or to prevent system discharge if the space is occupied.
Applications for CO2 fire systems include critical manufacturing process equipment, power generation turbines, building generator rooms, printing presses, flammable liquid storage facilities and marine applications.
Interstate Fire Protection has also worked nationwide with corporations in need of industrial fryer fire suppression systems. Working with our staff, we can assist in decision making process to determine whether a High Pressure CO2 System or Low Pressure CO2 System makes most economic sense at your facility without sacrificing the quality of fire protection you have come to expect from Interstate Fire Protection.
Inerting systems fight fire by lowering the oxygen content and raising the carbon dioxide content of the protected area to a point insufficient to support combustion, but sufficient to sustain human life.
Inerting agents such as INERGEN® and PROINERT® are a non-conductive/non-corrosive blend of naturally occurring gases: Nitrogen, Argon, and Carbon Dioxide (INERGEN® only). The agent is stored in cylinders that may be installed remotely or close to the space being protected. Inerting systems are extremely flexible and a single bank of agent cylinders can be used to protect multiple hazards.
INERGEN® and PROINERT® are clean, environmentally friendly, three-dimensional fire suppression agents. Both of these agents have zero ozone depletion potential, zero global warming potential, and zero atmospheric life time.
Critical facilities such as data processing rooms, telecommunications switching facilities, process control rooms, and others, requiring non-water based extinguishing agent that is electrically nonconductive.
Inerting agents are non-toxic and are designed to discharge into normally occupied spaces. Inerting agents will not harm sensitive electronic equipment. They are completely safe for personnel occupying the protected space.
Since inerting agents contain naturally occurring gases, they are not subject to any pending environmental legislation that would limit their production or use.
Halocarbon agents have effectively replaced Halon 1301. This group of agents has achieved excellent fire extinguishing capabilities as well as low impact on the environment.. Halocarbon agents are effective on Class A, B and C fires. They extinguish fire by physically cooling the fire and interrupting the chemical chain reaction of combustions.
Designed to discharge in 10 seconds or less, these agents act quickly to extinguish fire and limit damage to your valuable assets.
The cost effective agents we offer are: ECARO-25®, FM-200®, and NOVEC 1230® (marketed as SAPPHIRE by ANSUL, Inc.)
MSDS Sheets and Product Specifications
If you have any other questions regarding these products, feel free to contact us via email or by phone at 1-800-649-9881 or 1-800-717-6454 and we'll be glad to help.